Gday brewers.
To outline objectives here.
Hopefully bypass chest freezers thermostat with STC1000 thermostat.
As is I'm using a stc1000 inline with freezers thermostat to switch on compressor.
Power into freezer then power bypass up into Stc1000 in cabinet to cold relay which returns to power freezer.
ip0dk0md3fr.jpg
I've got the freezer thermostat set as cold as it goes so in theory the -5c that the stc is controlling should switch without any issues.
42lvo4coy2z.jpg
This is by bypass wire hooked into that black box top right
Freezers thermostat is blue arrow.
I've had the freezer for atleast 5 years and have run it like this the whole time
Recently I found the stc cold relay would be on but the freezer wouldn't be running (seemed to me like it's thermostat was switched off preventing the compressor from.l firing
This is the freezer specs
eroobddaiht.jpg
Looks like it's playing game this morning lol but still to unreliable.
kxmawjkafx0.jpg
That's the temp sensor or (thermistor?)
That black box us sorta the wiring Junction
I just gotta figure out where them wires go so I can wire them via the STC cold relay wires instead
That capacitor is probably for the compressor motor?
Anyhow I think this may have confused you more it's hard to see from just pictures
Another option is forgoing the STC all together now that I've added more glycol to the chamber it shouldn't freeze if I just use it own controller but I think bottom line it's playing up.
What do you rekon ?
If I get a new freezer it's 500$ ish I'd need to match the dimentions because of my cabinet build lol.
Anyhow enough rambling.
Back when I used one, I just plugged it in and played the freezer and or heater into the controller.
After a few beers, I can't wrap my head around what you have going there.
Maybe I'll look at it with a clear head in the morning.