Malted wheat whiskey

FL-Brewer

I really like wheated bourbons, and I love what malting does to wheat (based on the wheat beers I've drunk), so I decided to make an AG wheat malt whiskey.  Anybody else done the same?  Would love to hear your thoughts on the finished product, since mine is at least a year away.
My recipe is 100 pounds of malted white wheat, mashed and stripped in five separate 20 lb batches; about as much as my fermenter and half barrel boiler will handle.  I mashed naturally, just added hot water at 2lbs grain to one gallon of water ratio, to get me to 150F in an insulated cooler.  Usually did this in the evening, and transferred to my fermenter in the morning, cooled to 100F and pitched Fleishman's bakers yeast (just spread a generous dose of the dried yeast on top of the warm mash).  After five pot still stripping runs, I've got about eight and a half gallons of low wines at about 35%.  Gonna do my spirit run on my VM column when I can get a whole day free, which should be in the next few days.  
Will post some updates as I go, but hope someone else has done a similar recipe, would like to hear your feedback.  I have single grain AG batches of corn, barley malt, and oats aging now, so once I get this in glass to age, I should have a nice library of AG whiskeys to try some blending .... or just drinking like they are.  The corn is a little over a year old now, and I really like that one.Everyone has to believe in something. Me?  I believe I'll have another drink......

still_stirrin

Uh … yah.  I use wheat, corn and milo (all from the family farm) to make a nice bourbon.  Malting isn’t difficult for wheat, although corn can be a little trickier to malt.  Still, quite doable.
My suggestion would be to try the process, complete with malting, on a smaller scale to understand what’s in store.  It’s easier to manage 10lb. at a time than 100lb.  Get good at the process, and larger batches are all “in stride”.
I use 5 grains in the wheat bourbon the same as my 5-grain bourbon listed in my signature.  However, with the wheat bourbon, I increase the wheat to 50% of the grain bill.  And I reduce the corn to 15%.  The flaked oats (generic quick oats from the grocery store) is about 10%.  Malted barley is 15% and the milo (similar in flavor to the rye malt) is the remaining 10%.
Of note, a wheat bourbon is lighter in “whiskey flavor” than a bourbon.  And, a single malt whiskey has a distinct “whiskey flavor” that is omitted from the wheat bourbon.  Selection of aging woods and processes do affect both the color and flavors revealed in the whiskey.  But, the wheat bourbon is still a nice variation from the normal 50% corn bourbon I make.
I use the grains we grow on the farm as a low-cost opportunity, since it costs me NOTHING for the grains.  I keep the grains in one of my chest freezers to retain the moisture content and to kill off any bugs that undoubtedly would thrive in a bag setting in the basement.  Oh, it is best to malt the grains when they’re fresh from the field, as their enzymes are the healthiest at that time.  Freezing will slow their aging processes, but not kill them.
Again, I wouldn’t want to commit an untried recipe (and brewing process) with a 100lb. grain bill.  I always like to know ahead of time how the product will turn out.  You may be a bigger gambler than I am though, so YMMV.
ssAttention new distillers: Cranky's spoon feed info
My LM/VM & Potstill: My build thread
My Cadco hotplate modification thread: Hotplate Build
My stock pot gin still:  stock pot potstill
My 5-grain Bourbon recipe: Special K

FL-Brewer

Hey SS, thanks for the reply.  I like to go big or go home, lol.  Seriously though, I've gotten to where I understand the process well enough that all my batches end up being very drinkable.  I want to have a nice aging stock, and I know I'll use it for blending, so not worried about having too much.  I'm pretty sure I'm gonna like it, just wanted to get some advance tasting notes so I would know what to look for.  I also have thirsty friends that will make sure to help me keep my aging stock from getting out of control.Everyone has to believe in something. Me?  I believe I'll have another drink......

FL-Brewer

Should also add that my standard bourbon recipe is 50% corn, 30% malted wheat, 20% malted barley, I've made that several times and been happy with those batches.  All my whiskeys (except the all barley malt ones) are aged on new charred oak.  I even did one of the jugs of barley malt whiskey with new oak because I only had enough once used oak for the other four jugs.  That actually is a nice variation on Irish style, definitely sweeter, more bourbony than the traditional used oak version.Everyone has to believe in something. Me?  I believe I'll have another drink......

NormandieStill

I have a wheat and oat whisky that I made using porridge oats and unmalted wheat (10% oat) with HT enzymes for the mashing. The resulting whisky is smooth and very drinkable after only 6 months on charred oak. I can get raw wheat for peanuts at the local farm and have successfully malted a small batch but I need to scale up my drying system if I want to home malt enough for a full run."I have a potstill that smears like a fresh plowed coon on the highway" - Jimbo
A little spoon feeding *For New & Novice Distillers