Unitank - close transfer beer

theQ

I dont have chiller for my unitank, i think i can get by without one, however the issue I am facing is that when i transfer dry hopped beer the transfer is a headache, lots of clogging issues.
I have no filter, well I got one that looks like this, below, but the issue is that is too big (14") and flushing it would be a pain, didnt yet use it.
Then i saw these inline gaskets that have a mesh but not sure of what kind of sized I need to use. They don't seem to follow microns.
https://www.amazon.com/gp/product/B0785KWMBX/ref=ask_ql_qh_dp_hza

ljvoixlnbb3.png

msjy2008

I saw this on youtube by portly gentleman I went to brewtools and purchased one make sure you get a 1.5 tri clamp to 2inch triclamp
https://www.brewtools.us/filters/7712945/inline-filter-kit-2-ball-lock-for-post-fermentation-filtration-etc

ShaLaH

These work great - Products

theQ

thank you @ShaLaH! I dont see a prv but I guess is not needed,as is feed in and out from the top !?

ShaLaH

you don't need a prv. Connect racking port to beer line - bounce filter - beer line - ball lock disconnect. They have a Tri-clamp version or a smaller one. For the smaller one you'd want a 1.5" TC with a flare to connect hose to the filter, then filter to ball lock disconnect.
These work great. For really hoppy beers or ones with lots of fruit pulp, I'll close the butterfly valve once the filter gets full then unscrew the filter, clean & sanitize, re-attach, and proceed racking to keg again.